Your Pail. Your Choice. — How to Remove or Replace the Inner Lid on Your Janibell M400DS

Your Pail. Your Choice. — How to Remove or Replace the Inner Lid on Your Janibell M400DS

Your Pail. Your Choice.

How to Remove or Replace the Inner Lid on Your Janibell M400DS

We recently received a question from a customer about replacing the inner lid on their Janibell M400DS. It's a great opportunity to share a helpful feature of our waste disposal pails: you can choose to use your pail with or without its removable inner lid.

Whether you prefer an additional odor barrier or a more open disposal experience, the choice is yours.

Q1. Can I use my M400DS without the inner lid?

Yes! The M400DS inner lid can be removed and reinstalled based on your needs. Keeping it installed adds another barrier to help contain odors, while removing it allows a more open disposal experience.

One pail. Two ways to use it. Keep in mind that odor control may be reduced without the inner lid.

Q2. How do I remove the existing inner lid?

Before you begin: Stop using the unit, open the front door, and remove the refill cartridge to clear the work area. Wear protective gloves. Then carefully place the pail upside down on a protected, flat surface.

Method A — Release the hooks from below. Press the four retaining hooks inward in the order 1 → 2 → 3 → 4, then carefully remove the existing inner lid.

Janibell M400DS underside view with four inner lid retaining hooks numbered 1 through 4

Method A: Release hooks 1–4 in sequence. The front-door side is along the bottom edge of this view.

Q3. How do I install a replacement inner lid?

Once the old inner lid has been removed, follow these simple steps:

Step 1 — Align the lid

Position the replacement inner lid over the opening and align it with its frame.

Technician aligning replacement M400DS inner lid with its frame

Step 2 — Press into place

Press evenly along the edges until the retaining hooks engage.

Technician pressing the M400DS replacement inner lid securely into place

Step 3 — Make a final check

Ensure the inner lid is seated flat and securely attached. Check that the round opening operates freely. Reinstall the refill cartridge and close the front door.

M400DS replacement inner lid fully installed, ready for final inspection

Important safety reminder: Wear protective gloves. Do not twist the hooks or apply excessive force, as this may damage the parts.

Q4. Do I have to keep the inner lid installed?

Not at all. It's your choice. We design our waste disposal products with everyday flexibility in mind. Use your removable inner lid when you prefer an additional odor barrier, or remove it when your disposal routine calls for a more open opening.

Need a hand?

For help with your M400DS inner lid, email sales@magikan.co.kr or visit the Janibell DS Type 400 product page.

MAGIKAN / JANIBELL
Quality you can trust, Prices you will love.


Leave a comment

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.